Mastering the Art of Assessment Validation and Validating Assessments
Mastering the Art of Assessment Validation and Validating Assessments
Blog Article
RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards necessitate conducting two types of validation.
The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
An Overview of the Two Types of Assessment Validation
Unraveling Assessment Validation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
The Process of Assessment Tool Validation
Having outlined the two types of validation, it’s time to dive into assessment tool validation.
Best Times to Conduct Assessment Tool Validation
The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated by you
- new training products get added on scope
- review your course against training product updates
- when learning resources are identified as a risk during your risk assessment
The risk-based regulatory approach of ASQA requires RTOs to perform regular risk assessments. Student complaints about learning resources indicate it's time for assessment tool validation.
Which Training Products to Validate?
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
Assessment Tool Validation: Required Resources
Course Materials
Given that you are validating your assessment tools, you will need the complete array of your learning resources:
Mapping tool – the first document you should look at. It highlights which assessment items meet unit requirements, accelerating validation.
Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.
Assessment Validation Panel
Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.
In total, your validation panel must have:
Vocational competencies and current industry skills relevant to the unit being validated
Recent expertise and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the successor version
Assessment validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
ASQA does not provide a specific template for assessment tool validation, but numerous templates can be found online. These tools often have validators look at the tools as a whole to verify if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Examine?
As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Are equal opportunity and access ensured for everyone in the assessment process?
Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?
Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?
Fundamental Rules of Evidence
Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:
Lead by Example
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
change diapers
bottle preparation, bottle-feeding infants, and cleaning equipment
prepare solid foods and feed infants
appropriately respond to baby signs and cues
prepare and settle babies for sleep
monitor and encourage physical exploration and gross motor skills suitable for the age
Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Pay Attention to Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Full Compliance or Not Competent
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?
Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What types of information can be included in a work package?
The answer might include:
Needed resources
Associated expenses
Activity duration
Allocated roles and responsibilities
When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.
This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – elimination, isolation, use of engineering controls
People read more – isolation, engineering controls, administrative controls
Structural hazards – substituting, isolation, engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolation, use of engineering controls, administrative controls
Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.
Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.